Concrete Driveway Cost in Washington (2026)

Concrete driveway pours in Washington typically run $3,800–$10,000 for a 600 sq ft 4-inch concrete driveway pour at 3500 psi compressive strength. Buried footings must clear the 18-inch design frost line, and the state sits in moderate freeze-thaw exposure (ACI F1). Washington's combination of Cascadia Subduction Zone earthquake risk plus Seattle Fault Zone risk driving ASCE 7-22 SDC D1 seismic design category requirements west of the Cascade Range, persistent Pacific Northwest mildew growing conditions slowing fresh concrete cure rates, and Cascade Range wood-substrate moisture cycling forces continuous-rebar-tie schedules plus Special Inspector continuous observation on every Washington residential foundation pour above 1,500 sq ft — and Washington Coast salt-spray on Aberdeen, Long Beach, and Anacortes additionally drives epoxy-coated rebar specifications on every coastal Washington pour.

State Washington
Cities Covered 28
Typical 600 sq ft 4-inch concrete driveway pour $3,800 – $10,000
BLS cement mason wage $35.42/hr

Washington climate, soil & seismic drivers

  • Frost-line trench depth: 18-inch design minimum for buried footings
  • Freeze-thaw exposure (ACI 201.2R): F1 — moderate freeze-thaw, 4.5-6% air-entrainment recommended
  • Typical residential mix: 3500 psi compressive strength
  • Expansive soil risk: Moderate — periodic clay shrink-swell, standard footing reinforcement adequate
  • Sulfate exposure (ACI 318): S1 — moderate sulfate exposure, ASTM C150 Type II cement required
  • Seismic design category (ASCE 7-22): SDC D1 — high seismic risk + Special Inspector continuous observation required
  • Winter de-icer salt exposure: Moderate — periodic de-icer use

Washington licensing & permits

  • License status: Statewide license required
  • License board: Washington State Department of Labor & Industries — Contractor Registration (official site)
  • Permit: city or county building permit required for residential driveway pour > 200 sq ft; L&I Contractor Registration required statewide regardless of contract value

How concrete driveway costs vary in Washington

State-specific code or insurance rule: Washington RCW §18.27 requires every Washington concrete contractor to register with the Department of Labor & Industries regardless of contract value — Washington is one of only two states with no contract-value threshold for residential contractor registration alongside Oregon, and Washington's Cascadia Subduction Zone earthquake risk plus Seattle Fault Zone risk forces ASCE 7-22 SDC D1 seismic design category requirements on every residential foundation pour west of the Cascade Range, with Washington State Building Code Council additionally requiring Special Inspector continuous observation on every residential foundation pour above 1,500 sq ft per WAC 51-50-1704.

Cities in Washington

Compare concrete driveway pricing for 28 cities across Washington.

Got a quote? Check if it's fair.

Upload your estimate for an instant price and scope review tuned to Washington labor and material rates.

Analyze your quote

More state guides