Concrete Driveway Cost in Tennessee (2026)

Concrete driveway pours in Tennessee typically run $2,800–$7,400 for a 600 sq ft 4-inch concrete driveway pour at 3500 psi compressive strength. Buried footings must clear the 18-inch design frost line, and the state sits in moderate freeze-thaw exposure (ACI F1). Tennessee's New Madrid Seismic Zone influence across the western Tennessee Memphis-Jackson corridor forces ASCE 7-22 SDC C-D0 seismic design category requirements on every residential foundation pour in the corridor — and Tennessee's karst topography with limestone-driven sinkhole risk across central Tennessee from Murfreesboro to Cookeville requires geotechnical investigation on every Tennessee residential foundation pour to identify subsurface void or solution cavity risk, plus Eastern Tennessee Smoky Mountain hill-country pours additionally require terraced retaining wall design on every sloping residential lot.

State Tennessee
Cities Covered 17
Typical 600 sq ft 4-inch concrete driveway pour $2,800 – $7,400
BLS cement mason wage $21.42/hr

Tennessee climate, soil & seismic drivers

  • Frost-line trench depth: 18-inch design minimum for buried footings
  • Freeze-thaw exposure (ACI 201.2R): F1 — moderate freeze-thaw, 4.5-6% air-entrainment recommended
  • Typical residential mix: 3500 psi compressive strength
  • Expansive soil risk: Moderate — periodic clay shrink-swell, standard footing reinforcement adequate
  • Sulfate exposure (ACI 318): S0 — no sulfate exposure, Type I/II cement adequate
  • Seismic design category (ASCE 7-22): SDC C — moderate seismic risk, continuous-rebar-tie footings required
  • Winter de-icer salt exposure: Moderate — periodic de-icer use

Tennessee licensing & permits

  • License status: Statewide license required
  • License board: Tennessee Board for Licensing Contractors — required above $25,000 contract (official site)
  • Permit: city or county building permit required for residential driveway pour > 200 sq ft; TN BLC contractor license required above $25,000 contract; Home Improvement License above $3,000 in 6 specific counties

How concrete driveway costs vary in Tennessee

State-specific code or insurance rule: Tennessee Code §62-6 imposes a two-tier residential contractor scheme — the Tennessee Board for Licensing Contractors requires a full general contractor license above $25,000, but Davidson, Hamilton, Haywood, Knox, Marion, and Rutherford counties operate a separate Home Improvement License regime kicking in at $3,000, and Tennessee's New Madrid Seismic Zone influence across western Tennessee counties from Memphis to Jackson triggers ASCE 7-22 SDC C-D0 seismic design category requirements on every residential foundation pour in the corridor.

Cities in Tennessee

Compare concrete driveway pricing for 17 cities across Tennessee.

Got a quote? Check if it's fair.

Upload your estimate for an instant price and scope review tuned to Tennessee labor and material rates.

Analyze your quote

More state guides