Window Replacement Cost in Virginia (2026)

Window replacements in Virginia typically run $5,400–$14,400 for a 10-window 1,500 sq ft single-story full-house window replacement, with vinyl-frame double-hung the dominant residential choice and ENERGY STAR North-Central climate-zone glazing requirements (U-factor ≤ 0.32, SHGC ≤ 0.4). Virginia's combination of moderate Chesapeake Bay salt-spray on every Tidewater coastal exposure, F2 freeze-thaw cycling, Virginia Chesapeake Bay Preservation Act 100-foot Resource Protection Area buffer-zone setback requirement on every Tidewater residential install, ENERGY STAR North-Central climate zone driving moderate U-factor (≤0.32) and SHGC (≤0.40) requirements, Virginia Department of Historic Resources review on every state-mapped historic-district window replacement (30+ districts), and high TPCT termite zone 2 pressure across the southern half drives moderate Chesapeake-and-Virginia-historic-driven glazing selection.

State Virginia
Cities Covered 17
Typical 10-window 1,500 sq ft single-story full-house window replacement $5,400 – $14,400
BLS carpenter wage $21.84/hr

Virginia climate, wind & energy-code drivers

  • ENERGY STAR climate zone: North-Central — heating-dominant, balanced U-factor and SHGC (U ≤ 0.32, SHGC ≤ 0.40)
  • IECC climate zone: 4A
  • Maximum U-factor: 0.32 (IECC 2021 + state amendments)
  • Maximum SHGC: 0.4
  • ASCE 7-22 design wind speed: 115 mph (Risk Category II)
  • Hurricane impact-rated requirement: Mandatory ASTM E1996 large-missile impact-rated in coastal counties only
  • Dominant residential frame material: Vinyl frame — dominant in most climates, lowest cost-per-window
  • Historic-preservation overlay prevalence: High — multiple state-mapped historic districts with mandatory review
  • EPA RRP lead-safe trigger (pre-1978 housing share): Moderate — 20-40% pre-1978 housing share, EPA RRP required on selected replacements

Virginia licensing, lead-safe & permits

  • License status: Statewide license required
  • License board: Virginia Department of Professional & Occupational Regulation (DPOR) — Class A / B / C Contractor License (official site)
  • Permit: city or county building permit required for window opening modification; DPOR Class C license required above $1,000 (up to $10,000), Class B above $10,000, Class A above $120,000; Chesapeake Bay Preservation Act buffer-zone review required on every Tidewater install; Virginia Department of Historic Resources separately reviews every Charlottesville, Williamsburg, and Alexandria historic-district install

How window replacement costs vary in Virginia

State-specific code or insurance rule: Virginia Department of Professional & Occupational Regulation (DPOR) §54.1-1100 imposes one of the most contract-value-segmented residential builder licensing schemes in the country — every Virginia window contractor performing work above $1,000 must hold a Class C Contractor license, above $10,000 a Class B license, and above $120,000 a Class A license, with the DPOR Contractor Recovery Fund compensating affected homeowners up to $20,000 per project for DPOR-contractor abandonment, plus Virginia Department of Historic Resources separately reviews every window replacement within Virginia's 30+ state-mapped historic districts (Charlottesville Court Square, Williamsburg Historic Area, Old Town Alexandria, Fredericksburg, Richmond Court End, etc.) to ensure profile and glazing-pattern continuity with the surrounding 17th-19th century architectural overlay.

Cities in Virginia

Compare window replacement pricing for 17 cities across Virginia.

Got a quote? Check if it's fair.

Upload your estimate for an instant price and scope review tuned to Virginia labor and material rates.

Analyze your quote

More state guides